LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!LIMITED OFFER — $20 OFF LABOR on any appliance repair!
Back to all articles
Washer Repair5 min read

Washer Not Draining? 5 Common Causes & When to Call a Pro

A washing machine that won't drain leaves clothes soaking wet and your laundry day ruined. Here's what's likely causing it and how to fix it.

Clogged Drain Pump Filter

The most common reason a washer won't drain is a clogged pump filter. Lint, coins, hair ties, and small items accumulate over time and block water from exiting the drum. Most front-loaders have an access panel near the bottom where you can clear this filter yourself. Check it every 3–6 months as routine maintenance.

  • Place a towel and shallow pan under the filter before opening — water will spill out.
  • Clean the filter under running water and check for debris in the housing.
  • Run a short spin cycle after reinstalling to confirm the drain is clear.

Kinked or Clogged Drain Hose

The drain hose runs from the back of your washer to the standpipe or utility sink. If it's kinked, crushed behind the machine, or has a sock lodged inside, water can't exit. Pull the washer away from the wall and inspect the full length of the hose. The standpipe should be no higher than 96 inches from the floor.

Faulty Lid Switch or Door Latch

Top-load washers won't spin or drain if the lid switch is broken — the machine thinks the lid is open and stops the cycle as a safety measure. You'll usually hear a click when the lid closes properly. If there's no click, the switch likely needs replacement. Front-loaders have a door latch that serves the same purpose.

Failed Drain Pump

If the filter is clear and the hose is fine but the washer still won't drain, the drain pump motor itself may have failed. You might hear a humming sound as the motor tries to run but can't. Pump replacement is a repair best left to a technician — it involves disconnecting water lines and electrical components.

Control Board or Cycle Issue

Occasionally a software glitch or faulty control board causes the washer to skip the drain cycle entirely. Try resetting the machine by unplugging it for 60 seconds. If the problem persists across multiple cycles, the control board may need diagnosis.

When to Call a Professional

If you've checked the filter and hose and the washer still won't drain, it's time to call a pro. A failed pump or control board requires specialized tools and parts. Our technicians serve Houston, Rosenberg, Richmond, Sugar Land, and Katy — and we offer same-day service so you're not stuck with a drum full of water.

Still Having Trouble?

Our technicians serve Houston, Rosenberg, Richmond, Sugar Land, Katy & Pearland. Same-day appointments available 7 days a week.

24/7 Appliance Repair

Houston's trusted appliance repair experts. We fix washers, dryers, refrigerators, ovens, dishwashers, and more — fast.

(346) 262-0581

Service Area

  • Houston & Surrounding areas
  • Available 24/7 — including weekends & holidays

© 2026 24/7 Appliance Repair. All rights reserved.

Houston, TX