Dishes coming out of the dishwasher still dirty or with a film? These six issues are the most likely culprits — and some you can fix yourself today.
Clogged Spray Arms
The spray arms rotate and shoot water at your dishes. The small holes in the arms can clog with mineral deposits, food particles, or broken glass. Remove the spray arms (they usually twist off) and clear each hole with a toothpick or small wire. Rinse thoroughly before reinstalling.
- Run a dishwasher cleaner tablet monthly to prevent mineral buildup.
- Check the spray arm holes every few months, especially in hard-water areas like Houston.
Dirty or Clogged Filter
Most modern dishwashers have a manual-clean filter at the bottom of the tub. If it's clogged with food debris, water can't circulate properly and dishes come out dirty. Remove the filter, rinse it under hot water, and scrub gently with a soft brush. This should be done monthly.
Water Temperature Too Low
Dishwashers need water at 120°F to properly activate detergent and sanitize dishes. If your water heater is set too low or the dishwasher's heating element is failing, you'll get poor cleaning results. Run the hot water at your kitchen sink for 30 seconds before starting a cycle to ensure hot water enters the machine from the start.
Wrong Detergent or Incorrect Loading
Using too little detergent, old detergent, or the wrong type (hand dish soap causes excessive suds and poor cleaning) leads to dirty dishes. Also check your loading pattern — dishes should face the spray arms, and nothing should block the spray arm rotation.
Faulty Water Inlet Valve
The water inlet valve controls how much water enters the dishwasher. A partially clogged or failing valve may let in too little water, leaving the tub underfilled and dishes dirty. You'll often notice the dishwasher sounds quieter than usual during the fill cycle.
Worn Wash Pump or Motor
The wash pump forces water through the spray arms at pressure. A worn pump motor produces weak water pressure, resulting in poor cleaning even when everything else is working correctly. This is a repair that requires a technician — our team can diagnose and replace the pump same-day across the Houston area.